Burgundy
Off the grid

Off the grid: Nov 19

The night's builders keep circling one question: how to get power into a battery bank without a hybrid inverter. Also a 60-year-old serial standard, a corroded chuck, and books no one remembers.

Burgundy
3 min read ·

Tonight's issue keeps circling one problem: how to get power into a battery bank. Five threads posted November 18 on the DIY Solar Forum ask the same thing, how to charge batteries from a generator or the grid without routing that power through a hybrid inverter. Midnight_Driver, citing a video, wonders whether a 48-volt AC/DC charger wired in parallel with an off-grid inverter's batteries can keep them topped up. The worry is what happens when the battery sits at minimum voltage and the charger is still pushing 48 V at 30 A.

Others reach for a dedicated charger. RogerW runs two MPP Solar LV6548 inverters on an unstable grid. rauan1 has two 5,000-watt Eco-Worthy inverters and a Westinghouse 2200/1800 W generator. Both ask about EG4's Chargeverter. alank16 posted a solved write-up of a Kohler 26RCA feeding three parallel EG4 18kPVs through their GRID ports: the generator ran fine, but the inverters connected and immediately dropped it, over and over. "the fix ended up being a specific stack of things rather than one magic setting," they wrote.

The batteries themselves are changing hands. An off-grid owner, DrMorbius, watched an Outback FlexMax sag from above 25 V to 24 V under just a small fridge, a Starlink and a few lights, and asked about swapping worn lead-acid for lithium. sternwake, after years of waiting, is building a 12.8-volt LiFePO4 bank around Narada MFE315X4 cells and a JK BMS for a campervan tray. PowerTech0621 shared an open-source MPPT charge controller, a 300-to-500-watt buck-boost converter that takes 10 to 60 volts in and charges 12-, 24-, 36- and 48-volt banks.

For the field, Rapidrob is packing 18650 cells into a plastic .50-caliber ammo can. Three or four 21-cell, 16-amp-hour packs, each with its own BMS, to run an HF radio that draws 10 amps transmitting and 1 amp receiving. "If possible, I'd like the battery bank to run the radio for 48 hours in the field," they wrote. QRPer reader Bob, WB4SON, offered a store-bought option: an EcoFlow 25,000 mAh bank that outputs 5, 9, 12 or 15 volts at 3 amps.

Older signals endure too. Writing at Hackaday, Al Williams revisited RS-232, the serial standard the Electronic Industries Association introduced in 1960. Receivers read anything below -3 V as a one and above +3 V as a zero, with transmitters often swinging about ±12 V. Two computers wired directly still need a null-modem cable that crosses the transmit and receive lines, and a true RS-232 output can damage a microcontroller pin. For wireless, a Volos Projects build turns two ESP32 boards into walkie-talkies over Espressif's ESP-NOW, sending voice directly with no WiFi router between them.

Two cautions close the issue. On The Hobby-Machinist, rwm left a steel lathe-chuck housing soaking overnight in mineral spirits in an aluminum tray and found a mark on its face: "this somehow reacted with the steel, transferring a corrosion pattern to the chuck face! Who knew?!" And Lost Art Press, telling the origin story of 'The Joiner & Cabinet Maker,' made the case for the night's quieter theme: "Despite all of our technology and vast resources, there are still important books out there that have been completely forgotten."

Sources

  1. Solved: 3× EG4 18kPV + Kohler 26RCA connect/drop cycling on GRID ports · DIY Solar Forum
  2. Grid connection through battery AC/DC charger? · DIY Solar Forum
  3. Installing Chargeverter plus by EG4 · DIY Solar Forum
  4. Two 5000W Eco-Worthy inversters, battery and generator · DIY Solar Forum
  5. Using Lithium-ion with a FlexMax Outback · DIY Solar Forum
  6. Narada MFE315X4 and a JK-B2A8S30P-HC build. · DIY Solar Forum
  7. Open Source , High Efficiency 500W Solar MPPT Charge Controller, Lithium Battery Charger. · DIY Solar Forum
  8. Plastic .50 ammo can 18650 battery bank questions for a build? · DIY Solar Forum
  9. Bob Recommends EcoFlow 25,000mAh Power Deliver Bank (Early Black Friday Sale) · QRPer (Thomas Witherspoon, K4SWL)
  10. Serial: The Port That Won’t Die · Hackaday
  11. Build a walkie-talkies with two ESP32 boards and ESP-NOW · Adafruit Blog
  12. Ruined Finish On Chuck · The Hobby-Machinist
  13. The Wild Origin Story of ‘The Joiner & Cabinet Maker’ · Lost Art Press Blog

More from Burgundy